Status Line Messages - Neoware c50 - Thin Client User Manual

Wyse Emulations

Status Line Messages

The status line at the top of the window is divided into two sections. The left section
displays messages relating to the emulation and the right section is used to display
messages from the host. The type of status line displayed is determined by the setting
of the Status Line option in the Wyse Settings dialog box. The Extended status line
provides similar information to the Standard status line but with additional fields for
displaying information on local editing mode.
The emulation status messages are displayed in one of six or eight fields along the
first section of the status line, depending on whether the Standard or Extended status
line is displayed. The messages and their meanings are listed below.
FDX
1 2 3 4
Standard & Extended Status Line
Field 1: Indicates the current keyboard mode.
CAPS indicates that Caps Lock is on. Press the Caps Lock key to toggle
the mode on and off.
LOCK indicates that the keyboard is locked. This takes precedence over
the CAPS and NUM messages.
NUM indicates that Num Lock is on. Press the Num Lock key to toggle
the mode on and off.
Field 2: Indicates the number of the page that is currently displayed. No message
is displayed when the current page is 0.
Field 3: * indicates that Monitor mode is on. In this mode, received codes are not
actioned but displayed as symbolic representations.
Field 4: Indicates the current operating mode.
FDX indicates full-duplex mode.
HDX indicates half-duplex mode.
LCL indicates local mode.
BLK indicates block mode.
HBLK indicates half-duplex block mode.
HLD indicates that display update has been suspended. Pressing the
Hold key will toggle display update on and off.
21-2
001,001
5 6 7 8 Host Messages