Neoware c50 - Thin Client User Manual page 218

IBM 3151 Emulation
ECHO
1 2
Field 1: Indicates the current operating mode.
In BLOCK
cally, allowing you to edit it before a block of data is sent to the host.
In CHAR
and the display.
In ECHO
is then responsible for returning the data to the display.
Field 2: No messages are displayed in this field.
Field 3:
HOLD SCREEN
suspend screen update. Press Hold Screen again to enable screen up-
date.
INVALID KEY
KEYS LOCKED
unlocked when the Keyboard Unlock command is received or when the
Cancel key is pressed.
NUMERIC
PRINTING
SENDING
WRONG PLACE
field or field attribute character position. It is also displayed when you
try to insert a character or line in a screen already full when the Forcing
Insert option is set to Off.
Field 4:
INSERT
pressed or when the Insert Character command is received. Note that the
message will not be displayed if the Insert Character option is not set
to Mode. Insert mode is exited by pressing the Insert or Reset key.
Field 5:
CAPS
to toggle the mode on and off.
Field 6: No messages are displayed in this field.
Field 7: No messages are displayed in this field.
Field 8:
(rrr,ccc)
15-2
3 4
mode, keyboard entered data is displayed and processed lo-
mode, keyboard entered data is sent simultaneously to the host
mode, keyboard entered data is sent only to the host. The host
indicates that the Hold Screen key has been pressed to
appears when you press an invalid key.
appears when the keyboard is locked. The keys will be
indicates the cursor is located in an unprotected numeric field.
indicates that data is being sent to the printer.
indicates that data is being sent to the host.
appears when you press an invalid key in a protected
indicates that Insert mode is active when the Insert key is
indicates that caps-lock mode is active. Press the Caps Lock key
indicates the current row and column position of the cursor.
5 6 7
(001,001)
8