Keyboard Mapping - Neoware c50 - Thin Client User Manual

IBM 3151 Emulation
You can erase the character at the current cursor position by pressing the keys Ctrl
+ 2. If you want to restore the default definition, press the Clear key while the
cursor is in field B.
4. Press the Send key to store the key definition. The function key menu will be
cleared to allow you to enter the next key definition. If you do not wish to save
the definition, press Ctrl + Def F instead of Enter.
Note that the function keys can store a maximum of 128 characters between
them. When this number is reached or exceeded, field A will start blinking and
any characters following the 128th character will be discarded.
5. Repeat steps 2 to 4 until you have finished defining function keys.
6. To exit from the function key menu, press Ctrl + Def F.

Keyboard Mapping

The following illustrations show where IBM 3151 keyboard functions are mapped to
keys on the Enhanced AT, Sun 5, Sun 4 and HP 9000 series keyboard layouts.
15-4