Replay File; Printer Setup - Neoware c50 - Thin Client User Manual

The file for storing captured data may be selected either by clicking the pointer over
the filename in the Files list box then clicking the Ok button, or by clicking the pointer
in the Selection text box, typing the directory path and name of the file, then clicking
Ok.
The Filter text box enables you to select the directory for display in the Directories
list box. Click the pointer in the text box, enter the name of the directory then click the
Filter button to display all the files in that directory.
Clicking the Ok button after specifying the name of the file will cause all data received
from the host to be stored in that file until the Cancel Capture option is selected. The
contents of this file can be played back later by selecting the Replay File... option.

Replay File...

This option is only available when TeemTalk has been started using the -debug com-
mand line option or debugMode resource. It will display a dialog box similar to that
shown above to enable you to replay the contents of a file previously created by the
Capture File... option, either to the emulation (default) or the host. The dialog box is
used in the same way as described for the Capture File... option.
Cancel Capture
This option is only available when TeemTalk has been started using the -debug com-
mand line option or debugMode resource. It will cause TeemTalk to stop capturing
data during a Capture File session.
Cancel Replay
This option is only available when TeemTalk has been started using the -debug com-
mand line option or debugMode resource. It will cause TeemTalk to stop replaying
the contents of a capture file during a Replay File session.

Printer Setup...

This will display a menu that allows you to select one of two printer setup dialog
boxes:
Note: This option will not be available if the printerFile resource
or -pf command line option was used to specify printer
settings when TeemTalk was loaded.
The Text Printer Settings and Graphic Printer Settings dialog boxes are shown on
the next page.
Both dialog boxes enable you to specify whether print data is sent to a device, file or
UNIX printer.
Setup Menus
8-7