Neoware c50 - Thin Client User Manual page 128

Setup Menus
the listed 128-byte increments, or, by setting this option to Off, the default size of 260
bytes.
Status Border
Factory default: Unselected
This option enables you to display a thin border which separates the status line from
the rest of the lines on the display.
Return Function
Factory default: Unselected
This option specifies whether or not the function of the Enter key is defined by the
application when in Block mode. When selected, the key is regarded as an application
specific function key. Normally this should be unselected.
Bell On
Factory default: Unselected
This option enables or disables an audible tone which is heard when the emulation
warns you about something. This needs to be selected when you want to use the Bell
Column feature.
Telserv Format
Factory default: Selected
The setting of this option determines how network data is treated. When selected, data
will be treated in Tandem network server (Telserv) format. When unselected, data will
be treated in serial format.
Bell Column
Factory default: 0
This option enables you to specify a particular column on the display which will cause
an audible warning to sound when the cursor passes through it.
The valid range of column numbers is 1 to 80. Setting this option to 0 will disable the
feature. The Bell On option must be selected for this feature to work.
Include Euro
Factory default: Unselected
When this option is selected, the International Currency symbol will be replaced by the
Euro symbol.
8-54