Reset Terminal - Neoware c50 - Thin Client User Manual

Setup Menus

Reset Terminal

This will reset the current terminal emulation mode.
Save Settings
This will save the current setup configuration so that it is reasserted when TeemTalk is
subsequently reset or loaded, overriding any changes which have been made but not
saved.
Startup Options...
This displays a dialog box which enables you to specify how the TeemTalk window is
displayed on startup.
Selecting Maximised Window will cause the TeemTalk window to fill the screen
when it is started. The other options toggle visibility of the menu bar, scroll bar and
soft buttons on or off.
Open Connection...
This will display a dialog box enabling you to make a connection to a remote host.
TeemTalk has its own inbuilt telnet driver so that precise control can be exercised over
the information that TeemTalk receives and transmits. You must use the telnet facility
provided by TeemTalk when using block mode emulations such as IBM 3270.
8-5