Terminal Emulation Configuration; Emulation Options - Neoware c50 - Thin Client User Manual

Getting Started

Terminal Emulation Configuration

Emulation Options

The Emulation options in the Connection Wizard Connection Information dialog
box are as follows:
The ADDS A2 emulation provides compatibility with software designed to drive the
ADDS Viewpoint A2 terminal, as emulated by the Wyse WY-50/50+/60 terminals.
Refer to the Wyse Emulations chapter for details.
The AIXTerm emulation provides compatibility with software designed to drive an X
terminal using X Windows.
The ANSI BBS emulation is a derivative of the ANSI device driver ANSI.SYS
supplied with all DOS based PCs and which provides the screen management for the
DOS console screen. PC based UNIX systems and Bulletin Board Systems (BBS)
often rely on the ANSI emulation when being accessed by a PC.
The AT 386 emulation provides compatibility with software designed to drive the
AT&T AT 386 terminal.
The ATT4410 emulation provides compatibility with software designed to drive the
AT&T Dataspeed 4410 terminal. Refer to the AT&T 4410 Emulation section later in
this chapter for details.
The BQ 3107 emulation provides compatibility with software designed to drive the
Bull BQ 3107 terminal. Refer to the BQ 3107 Emulation chapter for details.
The DG 410/412 emulation provides compatibility with software designed to drive the
Data General D410 and D412 terminals. Refer to the DG 410/412 Emulation chapter
for details.
The HP 700-92/96 emulation provides compatibility with software designed to drive
the Hewlett Packard 700/92, 2392A, 2622A, 70094 and 70096 terminals. This
emulation is described in detail in the HP 700-92/96 Emulation chapter.
The HZ1500 emulation provides compatibility with software designed to drive the
Hazeltine 1500 terminal, as emulated by the Wyse WY-50/50+/60 terminals. Refer to
the Wyse Emulations chapter for details.
The IBM 3151 emulation provides compatibility with software designed to drive the
IBM 3151 terminal. Refer to the IBM 3151 Emulation chapter for information on this
emulation.
The IBM 3270 emulation provides compatibility with software designed to drive the
IBM 3270 terminal. Note that the initial display will be an ASCII text screen known as
Network Virtual Terminal mode (NVT mode for short). The setting of the IBM 3270
Model option determines the size of the display and whether or not extended attributes
are supported. Refer to the IBM 3270 Emulation chapter for details.
2-4