Tek Graphics Settings; Double Margin Text - Neoware c50 - Thin Client User Manual

Setup Menus

Tek Graphics Settings

This dialog box is available in versions of TeemTalk that support graphics emulations.
It can be displayed when running the 4010/4014 emulation by selecting Tek Graphics
in the Settings menu.
Gin Terminator
Factory default: CR/EOT
This option determines the termination character(s) that follow a GIN address trans-
mission, and can be set to one of the following:
Destructive Backspace
Factory default: Unselected
This option determines whether or not pressing the Backspace key will delete the
character to the left of the current cursor position.
When unselected, the cursor will move to the left without deleting characters when the
Backspace key is pressed.

Double Margin Text

Factory default: Unselected
This option is used to enable a second margin in Graphics Text mode.
When selected, graphics text will be written to the left half of the screen. When the
cursor reaches the last column of the bottom line it will move to the top of the second
margin. Text will then fill the right half of the screen.
8-40
CR/EOT GIN terminator (default)
CR GIN terminator
None No GIN terminator