Lacp Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual

LACP Configuration

To display the following form, select Layer 2 > LACP.
The following table describes the Switch LACP Configuration controls:
Table 119 Switch LACP Configuration controls
Control
LACP System Priority (1-65535)
Timeout time
Description
Defines the priority value (1 through 65535) for the switch. Lower numbers provide
higher priority. The default value is 32768.
Defines the timeout period before invalidating LACP data from a remote partner.
Choose (3 seconds) or
short
Note: HP recommends that you use a timeout value of
processing. If your switch's CPU utilization rate remains at 100% for periods of 90
seconds or more, consider using static trunks instead of LACP.
(90 seconds). The default value is
long
, to reduce LACPDU
long
Configuring the switch 151
.
long