Route Map Access List Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual

Table 136 Route Map Configuration controls
Control
Enabled?

Route Map Access List Configuration

NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, go to the Route Map Configuration form. Click Add Access List.
The following table describes the Access List Configuration controls:
Table 137 Access List Configuration controls
Control
Access List Identifier (1-8)
Network Filter (0-256, 0=none)
Metric (1-4294967295, 4294967295=none)
Action
Enabled?
Description
Enables or disables the route map.
Description
Assigns the access list number.
Sets the network filter number associated with the access list.
Sets the metric value in the AS-External (ASE) LSA.
Permits or denies action for the access list.
Enables or disables the access list.
Configuring the switch 168