Ospf Interfaces Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual

Table 148 OSPF Summary Range Configuration controls
Control
Subnet Mask

OSPF Interfaces Configuration

NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Interfaces (click the underlined text,
not the folder).
This form provides a summary of the state of OSPF interfaces.
The following table describes OSPF Interfaces Configuration controls:
Table 149 OSPF Interfaces Configuration controls
Control
Search Operation
Descriptions
Defines the IP address mask for the range.
Description
To focus the search for an OSPF interface, enter search parameters:
IP interfaces
Area Number
State
Fields that have a value of "any" are ignored during the search.
Choose a search operation:
or: Search for OSPF interfaces specified in the Search range that meet any of the criteria
entered.
and: Search for OSPF interfaces specified in the Search range that meet all of the criteria
entered.
Click Search to display OSPF interfaces that fit the range and meet the criteria entered.
Configuring the switch 181