Tacacs+ Dashboard - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual

TACACS+ Dashboard

To display the following form, select System > Tacacs+.
The following table describes the switch TACACS+ Dashboard controls:
Table 6 TACACS+ Dashboard controls
Control
Primary Tacacs+ IP Address
Secondary Tacacs+ IP Address
Tacacs+ port
Tacacs+ timeout
Tacacs+ retries
Tacacs+ Server
Tacacs+ Backdoor for Telnet
Tacacs+ Secure Backdoor for telnet
Tacacs+ new privilege level mapping
Description
Displays the primary TACACS+ server address.
Displays the secondary TACACS+ server address.
Displays the number of the TCP port for TACACS+.
Displays the amount of time, in seconds, before a TACACS+ server
authentication attempt is considered to have failed.
Displays the number of failed authentication requests before switching to a
different TACACS+ server.
Displays the status of the TACACS+ server.
Displays the status of the TACACS+ back door for telnet. The
command also applies to SSH/SCP connections and the Browser-based
Interface (BBI). This command does not apply when secure backdoor
( ) is enabled.
secbd
Displays the status of the TACACS+ back door using secure password for
telnet/SSH/ HTTP/HTTPS. This command does not apply when backdoor
(telnet) is enabled.
Displays the status of the TACACS+ new privilege-level mapping feature.
telnet
Dashboard 21