Network Filters Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual

Network Filters Configuration

NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, select Layer 3 > Network Filters (click the underlined text, not the folder).
This form summarizes network filter parameters.
The following table describes Network Filters Configuration controls:
Table 133 Network Filters Configuration controls
Control
Search Operation
Description
To focus the search for a network filter, enter optional search parameters:
Network Filter ID
IP address and subnet mask
State
Fields that have a value of "any" are ignored during the search.
Choose a search operation:
or: Search for network filters specified in the Search range that meet any of the criteria
entered.
and: Search for network filters specified in the Search range that meet all of the criteria
entered.
Click Search to display network filters that fit the range and meet the criteria entered.
Configuring the switch 164