The following table describes the Switch Spanning Tree Groups Configuration controls:
Table 111
Switch Spanning Tree Groups Configuration controls
Control
Search Range
Search Options
Switch Spanning Tree Group Configuration
To display the following form, go to the Switch Spanning Tree Groups Configuration form. Select a Spanning
Tree Group number, or open the Spanning Tree Groups folder and click Add Spanning Tree Group.
Spanning Tree bridge parameters can be configured for each Spanning Tree Group.
Description
To search for a Spanning Tree Group, enter a range of group numbers in the From and To fields.
To focus the search for a Spanning Tree Group, enter optional search parameters:
Bridge Priority
Spanning Tree State
Fields that have a value of "any" are ignored during the search.
Choose a search operation:
or: Search for Spanning Tree Groups specified in the search range that meet any of the criteria
entered.
and: Search for Spanning Tree Groups specified in the search range that meet all of the criteria
entered.
Click Search to display Spanning Tree Groups that fit the range and meet the criteria entered.
Configuring the switch 142