Configuring the switch
Introduction
The switch BBI can be used to view and change switch configuration parameters. The same configuration
parameters that are available through the switch's command-line interface are present on the BBI configuration
forms.
The following provides a basic outline for switch configuration. You should first be familiar with configuration as
covered in the HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Command Reference Guide.
IMPORTANT:
You must be logged in using the administrator account in order to change switch configuration
settings.
Configuration steps
Follow these basic steps for viewing or configuring switch parameters:
1.
Select the Configure context button in the toolbar.
2.
Select a feature icon in the navigation window. For example:
Configuring the switch 111