Igmp Filter Configuration; Igmp Filtering Port Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual
Ethernet blade switch for c-class bladesystem browser-based interface reference guide
Hide thumbs
Also See for GbE2c - Blc Layer 2/3 Fiber SFP Option:
- Command reference manual (175 pages) ,
- Application manual (165 pages) ,
- Cli reference manual (153 pages)
Table of Contents
Advertisement
IGMP Filter Configuration
To display the following form, go to the IGMP Filters Configuration form. Select a Filter ID, or open the IGMP
Filters folder and click Add Filter.
The following table describes the IGMP Filter Configuration controls:
Table 142
IGMP Filter Configuration controls
Control
Filter Identifier (1 - 16)
Enabled?
Range 1 IP Multicast Address
Range 2 IP Multicast Address
Action
IGMP Filtering Port Configuration
To display the following form, select Layer 3 > IGMP > Switch Ports.
Description
Selects an IGMP filter to configure.
Enables or disables this IGMP filter.
Configures the start of the range of IP multicast addresses for this filter.
Configures the end of the range of IP multicast addresses for this filter.
Allows or denies multicast traffic for the IP multicast address range specified.
Configuring the switch 174
Advertisement
Table of Contents
Need help?
Do you have a question about the GbE2c - Blc Layer 2/3 Fiber SFP Option and is the answer not in the manual?
Questions and answers