Static Multicast Router Configuration For Port - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual
Ethernet blade switch for c-class bladesystem browser-based interface reference guide
Hide thumbs
Also See for GbE2c - Blc Layer 2/3 Fiber SFP Option:
- Command reference manual (175 pages) ,
- Application manual (165 pages) ,
- Cli reference manual (153 pages)
Table of Contents
Advertisement
Static Multicast Router Configuration for Port
To display the following form, go to the IGMP Static Multicast Router Configuration form. Select an Mrouter Port
number, or open the IGMP Static Mrouter folder and click Add Mrouter.
NOTE:
When you configure a static multicast router on a VLAN, the process of learning multicast routers is
disabled for that VLAN.
The following table describes the Static Multicast Router Configuration for Port controls:
Table 144
Static Multicast Router Configuration for Port
Control
Mrouter Port ID
Vlan ID
IGMP Version?
Description
Selects a port on which the static multicast router is connected.
Note: Port number must be an external port (17-18, 20-24).
Selects a VLAN on which the static multicast router is connected.
Configures the IGMP version (1 or 2) of the multicast router.
Configuring the switch 176
Advertisement
Table of Contents
