Access Control List Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual
Ethernet blade switch for c-class bladesystem browser-based interface reference guide
Hide thumbs
Also See for GbE2c - Blc Layer 2/3 Fiber SFP Option:
- Command reference manual (175 pages) ,
- Application manual (165 pages) ,
- Cli reference manual (153 pages)
Table of Contents
Advertisement
Access Control List Configuration
To display the following form, go to the ACL Configuration Table form, and select an ACL number, or open the
Access Control Lists folder and click Add ACL.
This form allows you to define filtering criteria for the Access Control List (ACL).The following table describes the
Access Control List configuration controls:
Table 170
Access Control List Configuration controls
Control
ACL ID (1-762)
Filter Action
Ethernet Packet Format
Tagging Packet Format
Source MAC Address
Destination MAC Address
Description
Assigns a numeric identifier to the ACL.
Configures a filter action for packets that match the ACL definitions. You can choose to
permit (pass) or deny (drop) packets, or set the Class of Service queue that handles the
packets.
Defines the Ethernet format for the ACL.
Defines the tagging format for the ACL.
Defines the source MAC address for this ACL.
Defines the destination MAC address for this ACL.
Configuring the switch 202
Advertisement
Table of Contents
