Rmon History Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual
Ethernet blade switch for c-class bladesystem browser-based interface reference guide
Hide thumbs
Also See for GbE2c - Blc Layer 2/3 Fiber SFP Option:
- Command reference manual (175 pages) ,
- Application manual (165 pages) ,
- Cli reference manual (153 pages)
Table of Contents
Advertisement
RMON History Configuration
To display the following form, go to the RMON History Groups Configuration form. Select a History Group, or
open the History folder and click Add History Group.
The following table describes the History Group Configuration controls:
Table 123
History Group Configuration controls
Control
History Group ID (1-65535)
MIB Object ID
Number of Buckets Requested
(1-65535)
NOTE:
The maximum number of buckets that can be granted is 50.
Polling Interval (1-3600)
Owner
Description
Configures a numeric identifier for the selected History index.
Configures the interface MIB Object Identifier.
The interface OID can have a maximum of 127 characters.
Configures the number of requested buckets, which is the number of data slots into which
data is to be saved.
The range is from 1 to 65535. The default is 30.
Configures the time interval over which the data is sampled for each bucket.
The range is from 1 to 3600 seconds. The default value is 1800 seconds.
Enter a text string that identifies the person or entity that uses this History Group.
The owner can have a maximum of 127 characters.
Configuring the switch 154
Advertisement
Table of Contents
Need help?
Do you have a question about the GbE2c - Blc Layer 2/3 Fiber SFP Option and is the answer not in the manual?
Questions and answers