Route Maps Configuration
NOTE:
This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, select Layer 3 > Route Maps (click the underlined text, not the folder).
The following table describes Route Maps Configuration controls:
Table 135
Route Maps Configuration controls
Control
Search Operation
Description
To focus the search for a route map, enter optional search parameters:
Route Map ID
Precedence
State
Fields that have a value of "any" are ignored during the search.
Choose a search operation:
or: Search for route maps specified in the Search range that meet any of the criteria
entered.
and: Search for route maps specified in the Search range that meet all of the criteria
entered.
Click Search to display route maps that fit the range and meet the criteria entered.
Configuring the switch 166