HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual page 105

Ethernet blade switch for c-class bladesystem browser-based interface reference guide
Hide thumbs Also See for GbE2c - Blc Layer 2/3 Fiber SFP Option:
Table of Contents

Advertisement

The following table describes IP Routing Management statistics for the selected interface:
Table 84
IP Routing Management Statistics
Statistic
General
InReceives
InDelivers
FwdDatagrams
FragOKs
Frag Creates
InDiscards
IP Interface Statistics
ifInOctets
ifInNuCastPkts
ifInErrors
ifOutOctets
ifOutNucastPkts
ifOutErrors
ifInUcastPkts
ifInDiscards
ifInUnknownProtos
ifOutUcastPkts
ifOutDiscards
Description
The total number of input datagrams received from interfaces, including those received in
error.
The total number of input datagrams successfully delivered to IP user-protocols (including
ICMP).
The number of input datagrams for which this entity (the switch) was not their final IP
destination, as a result of which an attempt was made to find a route to forward them to
that final destination.
In entities which do not act as IP Gateways, this counter will include only those packets,
which were Source-Routed via this entity (the switch), and the Source- Route option
processing was successful.
The number of IP datagrams that have been successfully fragmented at this entity (the
switch).
The number of IP datagram fragments that have been generated as a result of
fragmentation at this entity (the switch).
The number of input IP datagrams for which no problems were encountered to prevent their
continued processing, but which were discarded (for example, for lack of buffer space).
This counter does not include any datagrams discarded while awaiting re-assembly.
The total number of octets received on the interface, including framing characters.
The number of packets, delivered by this sublayer to a higher sublayer, which were
addressed to a multicast or broadcast address at this sublayer. This object is deprecated in
favor of ifInMulticastPkts and ifInBroadcastPkts.
For packet-oriented interfaces, the number of inbound packets that contained errors
preventing them from being delivered to a
higher-layer protocol.
For character-oriented or fixed-length interfaces, the number of inbound transmission units
that contained errors preventing them from being deliverable to a higher-layer protocol.
The total number of octets transmitted out of the interface, including framing characters.
The total number of packets that higher-level protocols requested to be transmitted, and
which were addressed to a multicast or broadcast address at this sublayer, including those
that were discarded or not sent.
This object is deprecated in favor of ifOutMulticastPkts and ifOutBroadcastPkts.
For packet-oriented interfaces, the number of outbound packets that could not be
transmitted because of errors.
For character-oriented or fixed-length interfaces, the number of outbound transmission units
that could not be transmitted because of errors.
The number of packets, delivered by this sublayer to a higher sublayer, which were not
addressed to a multicast or broadcast address at this sublayer.
The number of inbound packets which were chosen to be discarded even though no errors
were detected to prevent their being delivered to a higher-layer protocol. One possible
reason for discarding such a packet could be to free up buffer space.
The number of locally addressed datagrams received successfully but discarded because of
an unknown or unsupported protocol.
The total number of packets that higher-level protocols requested to be transmitted, and
which were not addressed to a multicast or broadcast address at this sublayer, including
those that were discarded or not sent.
The number of outbound packets that were chosen to be discarded even though no errors
had been detected to prevent their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.
Viewing statistics 105

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GbE2c - Blc Layer 2/3 Fiber SFP Option and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Gbe2cXw460c - proliant - blade workstation

Table of Contents