RIP General Configuration
NOTE:
This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, select Layer 3 > Routing Information Protocol > General.
The following table describes the RIP Interface Configuration controls:
Table 158
RIP General Configuration controls
Control
Globally Enable RIP?
Update Period (1-120 sec)
Virtual Routers Configuration
NOTE:
This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, select Layer 3 > Virtual Router Redundancy Protocol > Virtual Routers (click the
underline text, not the folder).
Descriptions
Globally enables or disables RIP.
Configures the time interval for sending for RIP table updates, in seconds.
The default value is 30 seconds.
Configuring the switch 190