Route Map Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual

Route Map Configuration

NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, go to the Route Maps Configuration form. Select a route map ID number, or open
the Route Maps folder and click Add Route Map.
The following table describes the Route Map Configuration controls:
Table 136 Route Map Configuration controls
Control
Route Map Identifier (1-32)
Local Preference (1-4294967294 | none=4294967295)
Precedence (1-255)
AS-Path Prepend of the Matched Route
Metric (1-4294967294 | none=4294967295)
Weight (0-65534 | none=65535)
Description
Assigns a numeric identifier to the route map.
Sets the local preference of the matched route, which affects both
inbound and outbound directions. The path with the higher
preference is preferred.
Sets the precedence of the route map. The smaller the value, the
higher the precedence. Default value is 10.
Sets the AS path preference of the matched route. One to three
path preferences can be configured.
Sets the metric of the matched route.
Sets the weight of the route map.
Configuring the switch 167