Udp/Snmp Statistics - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual

Table 48 TCP Statistics
Statistic
tcpAttemptFails
tcpEstabResets
tcpRetransSegs
tcpInErrs
tcpCurBuff
tcpCurConn
tcpOutRsts
All TCP allocated control blocks
Destinate Address
Remote Port
Source Address
Local Port
State

UDP/SNMP Statistics

To display the following form, go to the Management Processor Statistics form. Select UDP Stats or SNMP Stats.
UDP statistics are described in the following table:
Table 49 UDP Statistics
Statistic
udpInDatagrams
udpOutDatagrams
udpInErrors
udpNoPorts
Description
The number of times TCP connections have made a direct transition to the CLOSED state
from either the SYN-SENT state or the SYNRCVD state, plus the number of times TCP
connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
The number of times TCP connections have made a direct transition to the CLOSED state
from either the ESTABLISHED state or the CLOSE-WAIT state.
The total number of segments retransmitted - that is, the number of TCP segments
transmitted containing one or more previously transmitted octets.
The total number of segments received in error (for example, bad TCP
The total number of outstanding memory allocations from heap by TCP protocol stack.
The total number of outstanding TCP sessions that are currently opened.
The number of TCP segments sent containing the RST flag.
Switch IP address of TCP connections.
TCP port used by the remote device.
IP address of TCP source connections.
Available TCP ports used for connecting to the switch.
State of each TCP connection.
Description
The total number of UDP datagrams delivered to the switch.
The total number of UDP datagrams sent from this entity (the switch).
The number of received UDP datagrams that could not be delivered for reasons other than the
lack of an application at the destination port.
The total number of received UDP datagrams for which there was no application at the
destination port.
).
checksums
Viewing statistics 68