Ip Static Routes Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual

IP Static Routes Configuration

NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, select Layer 3 > Network Routes (click the underlined text, not the folder).
This form summarizes static route parameters.
The following table describes IP Static Routes Configuration controls:
Table 130 IP Static Routes Configuration controls
Control
Search Operation
Description
To focus the search for an IP static route, enter search parameters:
Static Route ID
Destination IP address and subnet mask
Gateway IP address and subnet mask
Fields that have a value of "any" are ignored during the search.
Choose a search operation:
or: Search for IP static routes specified in the Search range that meet any of the criteria
entered.
and: Search for IP static routes specified in the Search range that meet all of the criteria
entered.
Click Search to display IP static routes that fit the range and meet the criteria entered.
Configuring the switch 161