Switch Radius Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual

The following table describes User Access Configuration controls:
Table 93 User Access Configuration controls
Control
User ID (1-10)
Set Class of Service
Set user name (0-8 chars)
Set user password (0-128 chars)
Re-type user password (0-128 chars)
User Status

Switch RADIUS Configuration

To display the following form, select System > Radius.
The following table describes Switch Radius Configuration controls:
Table 94 Switch RADIUS Configuration controls
Control
Primary Radius IP Address
Secondary Radius IP Address
Radius port (1500-3000)
Radius timeout (1-10)
Radius retries (1-3)
Enable/Disable Radius Server
Description
Sets a numeric identifier for the user.
Sets the Class-of-Service to define the user's authority level.
Defines the user name of maximum eight characters.
Sets the user password of up to 128 characters maximum.
Confirms the user password.
Enables or disables the user.
Description
Configures the primary Radius server address.
Configures the secondary Radius server address.
Configures the number of the UDP port to be configured, between 1500 -
3000. The default is 1645.
Configures the amount of time, in seconds, before a Radius server
authentication attempt is considered to have failed. The default is 3 seconds.
Configures the number of failed authentication requests before switching to a
different Radius server. The default is 3 requests.
Enables or disables the Radius server.
Configuring the switch 119