Default Gateways Dashboard - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual

The Flags field is interpreted as follows:
Table 30 ARP Dump Flag Parameters
Flag
Interface
Indirect
Unresolved

Default Gateways Dashboard

To display the following form, select Layer 3 > Default Gateways (click the underlined text, not the folder).
The following table describes the Default Gateways Dashboard controls:
Table 31 Default Gateways Dashboard controls
Control
Search Range
Search Options
Status
Default Gateway ID
IP Address
Description
Permanent entry created for switch IP interface
Indirect route entry
Unresolved ARP entry. The MAC address has not been learned.
Description
To search for a Default Gateway, enter a range of Gateway numbers in the From and
To fields.
To focus the search for a Default Gateway, enter optional search parameters:
IP Address
Subnet Mask
Default Gateway State
Fields that have a value of "any" are ignored during the search.
Choose a search operation:
or: Search for Default Gateways specified in the search range that meet any of the
criteria entered.
and: Search for Default Gateways specified in the search range that meet all of the
criteria entered.
Click Search to display Default Gateways that fit the range and meet the criteria
entered.
Shows if the Default Gateway is enabled (green) or disabled (red).
Displays the numeric identifier of the Default Gateway.
Displays the IP Address of the Default Gateway.
Dashboard 45