OSPF General Configuration
NOTE:
This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, select Layer 3 > OSPF Routing Protocol > General.
The following table describes the OSPF General Configuration controls:
Table 145
OSPF General Configuration controls
Control
Globally Enable OSPF?
External LSDB Limit (0-2000)
Default Route Metric (1-16777215, 0=none)
Default Route Metric Type
Descriptions
Enables or disables OSPF.
Sets the link state database limit. Enter zero (0) to indicate that there is no
limit.
Sets one default route among multiple choices in an area.
Sets the default-route metric type. Enter
default.
to indicate that there is no
none
Configuring the switch 177