Bandwidth Control - D-Link DES-3326SR User Manual

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide

Bandwidth Control

The bandwidth control settings are used to place a ceiling on
the transmitting and receiving data bit rates for any port.
To change the maximum allowed
bandwidth for a given port:
In the Bandwidth Control Table,
click the selection button in the far
left column that corresponds to the
port you want to configure and click
the Edit button. A new dialog box
used to edit bandwidth settings
opens.
Figure 6 - 94. Edit Port Bandwidth
To limit either the Rx or Tx rates,
deselect the No Limit check box and
type the desired rate. Rates can be
expressed using whole numbers up
to the maximum available rate for
the port.
Figure 6 - 95. Bandwidth Control Table
268