Table of Contents
Advertisement
6. Carefully grasp the adapter by its top edge or upper corners, and pull the
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 139.
Installing an IBM Virtual Media Key
The optional IBM Virtual Media Key enables the IMM remote presence and
blue-screen capture capability. This feature provides graphical console redirection
with remote keyboard and mouse interaction, plus remote diskette and CD/DVD
drive support.
To install a virtual media key, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Remove the cover (see "Removing the cover" on page 44).
4. Align the mounting bracket on the rear of the virtual media key with the
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 139.
adapter from the PCI expansion slot.
on page 37.
external cables (see "Turning off the server" on page 22).
mounting tab and slide it down the tab onto the virtual medial key connector on
the system board. Press the virtual media key down into the connector until it is
firmly seated on the system board.
Chapter 2. Installing optional devices
57
Advertisement
Table of Contents
