Installing An Ibm Virtual Media Key; Removing A Usb Hypervisor Memory Key - IBM System x3650 M3 4255 Service Manual

Installing an IBM virtual media key

To install a virtual media key, complete the following steps:
1. Align the virtual media key with the virtual media key connector pins on the
2. Insert the virtual media key onto the pins until it clicks into place.
3. Install the server cover (see "Installing the cover" on page 178).
4. Slide the server into the rack.
5. Reconnect the external cables; then, reconnect the power cords and turn on the

Removing a USB hypervisor memory key

186
IBM System x3650 M3 Types 4255, 7945, and 7949: Problem Determination and Service Guide
system board as shown in the illustration.
peripheral devices and the server.