Download Print this page

IBM 7945G2U Installation And User Manual page 70

User manual
Hide thumbs

Advertisement

54
System x3650 M3 Types 4255, 7945, and 7949: Installation and User's Guide
Adapter
7. Install the adapter:
a. If the adapter is a full-length adapter for the upper expansion slot in the
riser card, remove the full-length-adapter bracket from underneath the top
of the riser-card assembly and insert it in the end of the upper expansion
slot of the riser-card assembly. See "Installing the full-length-adapter
bracket" on page 51 for instructions.
b. Align the adapter with the adapter connector on the riser-card and the
guide on the external end of the PCI riser-card assembly.
c. Press the adapter firmly into the adapter connector on the riser card.
8. Connect any required cables to the adapter.
Attention:
v When you route cables, do not block any connectors or the ventilated space
around any of the fans.
v Make sure that cables are not routed on top of components that are under
the PCI riser-card assembly.
v Make sure that cables are not pinched by the server components.
9. Align the PCI riser-card assembly with the selected PCI riser-card connector
on the system board.
Expansion-slot
cover
PCI
riser-card
assembly

Advertisement

loading

  Also See for IBM 7945G2U

  Related Manuals for IBM 7945G2U