IBM 7945G2U Installation And User Manual page 148

User manual
Hide thumbs Also See for 7945G2U:
Table of Contents

Advertisement

5. Remove the retention bracket from the current location:
6. Install the retention bracket in the new location on the SAS riser-card assembly:
132
System x3650 M3 Types 4255, 7945, and 7949: Installation and User's Guide
a. Pinch the bottoms of both bracket posts and push the posts up out of the
SAS riser-card assembly.
b. Rotate the bracket to free the bracket tab from the slot on the SAS
riser-card assembly.
a. Insert the bracket tab into the slot on the SAS riser-card assembly.
b. Rotate the bracket so that the bracket posts align with the holes in the SAS
riser-card assembly.
c. Press the posts through the holes in the SAS riser-card until they click into
place.
d. Install the SAS controller on the SAS riser-card (see "Installing a ServeRAID
SAS controller on the SAS riser-card" on page 122).
e. Install the riser-card assembly in the server (see "Installing the SAS
riser-card and controller assembly" on page 118).
f. Connect the power cords and all external cables, and turn on the server and
peripheral devices.

Advertisement

Table of Contents
loading

Table of Contents