Use Another Paper; Messages Regarding Printing Or Adjusment - Canon imagePROGRAF iPF810 User Manual

Messages regarding printing or adjusment

Messages regarding printing or adjusment

Use another paper.

The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
Cannot print as specied.
Lift the release lever and replace paper with A4/LTR (vertical) or
larger.
The loaded paper is too small.
Lift the release lever and replace roll with 10 in. wide or larger roll.
The loaded paper is too small.
Cannot adjust band.
The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for automatic feed amount adjustment.
674 Error Message
Cause
Cause
Cause
Cause
Corrective Action
Press the Online button to clear the error.
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.554)
Press the Online button to clear the error, and then
adjust the feed amount manually.
(→P.566)
Corrective Action
Switch to paper A4/Letter (vertical) or larger.
Corrective Action
Load a roll 10 inches wide or larger.
Corrective Action
Execute Auto Band Adj. again, as follows.
1.
Press the Online button to clear the error.
2.
Print a test pattern to check the nozzles.
(→P.587)
3.
Clean the Printhead if the nozzles are clogged.
(→P.588)
4.
Execute Auto Band Adj. again.
(→P.564)
Press the Online button to clear the error, and then
adjust the feed amount manually.
(→P.566)