Registering The Printer; Printing From The Application Software; Printing In Mac Os X - Canon imagePROGRAF iPF810 User Manual

Printing procedure

Printing in Mac OS X

Print from the application menu after registering the printer.
Important
•
We recommend exiting unnecessary applications before printing. Running several applications while
printing may interrupt the transfer of print data and affect printing quality.

Registering the printer

Before printing, you must register the printer in Printer Setup Utility (or Print Center ).
For instructions on registering the printer, see "Conguring the Printer Driver Destination (Macintosh)".
(→P.481)
Important
•
During this process, the printer will not be listed among available printers if it is off or disconnected.
•
By factory default, the AppleTalk protocol is disabled on the printer. In Mac OS X 10.4 and earlier, you
must enable AppleTalk protocol on the printer before using the printer in an AppleTalk network. For
instructions on activating AppleTalk protocol, see "Conguring the Destination for AppleTalk Networks
(Macintosh)". (→P.483)

Printing from the application software

1.
In the application software, select Print from the File menu to display the dialog box for printing
conditions.
Note
•
This dialog box includes basic printing options and enables you to choose the printer, specify the
range of pages, number of copies, and so on.
2.
Select the printer in the Printer list.
116 Basic Printing Workow