Messages Regarding Printing Or Adjusment; Use Another Paper; Cannot Execute This Command. Use Other Paper; Cannot Print As Specified - Canon 2163B002 User Manual

User manual for windows
Table of Contents

Advertisement

Messages regarding printing or adjusment

Messages regarding printing or adjusment

Use another paper.

The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.

Cannot execute this command. Use other paper.

The loaded paper cannot be used for color calibration. Load paper compatible with color calibration.*1 See
*1: Always make sure the loaded paper matches the media type setting on the printer. Adjustment cannot
be completed correctly unless the setting value matches the loaded paper.
Cannot print as specied.
Lift the release lever and replace paper with A4/LTR (vertical) or larger
The loaded paper is too small.
Lift the release lever and replace roll with 10 in. wide or larger roll
The loaded paper is too small.

Cannot adjust band.

The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for feed amount adjustment.
780 Error Message
Cause
Cause
Cause
Cause
Cause
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.650)
Adjust the feed amount manually.
(→P.658)
"Paper Reference Guide ." (→P.169)
Corrective Action
Switch to paper A4/Letter (vertical) or larger.
Corrective Action
Load a roll 10 inches wide or larger.
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.695)
2.
Clean the Printhead if the nozzles are clogged.
(→P.696)
Adjust the feed amount manually.
(→P.658)
Corrective Action
Corrective Action
Corrective Action

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf8100

Table of Contents