Canon imagePROGRAF iPF810 User Manual page 105

Weight Flange
Glossy Photo Paper, Semi-Glossy Photo Paper,
Heavyweight Glossy Photo Paper, Heavyweight
SemiGlossy Photo Paper, Fine Art Photo Paper,
Fine Art Heavyweight Photo Paper, Fine Art
Textured Paper, Canvas Matte, Fine Art Block Print,
Fine Art Watercolor, Proong paper, Coated Paper,
Heavyweight Coated Paper, Extra Heavyweight
Coated Paper, Colored Coated Paper, Synthetic
Paper, Adhesive Synthetic Paper, Backprint Film,
Backlit Film, Flame-Resistant Cloth, Fabric Banner,
Thin Fabric Banner
Premium Matte Paper
*1: If you cannot retract stiff paper well using Weight Flange 1 or if the diameter of the retracted paper
is wider than the Rewind Spool, use Weight Flange 2. When using Weight Flange 2, adjust the
paper feed amount by executing Auto Band Adj.. (→P.564)
Note
•
Do not use combinations other than those identied here.
•
Insert the Weight Flange and Weight Joint rmly on the Weight Roll.
•
Use identical Weight Flange on the left and right ends. Insert matching Weight Flanges (1 or 2) on
both ends of the Weight Roll.
•
Keep unused weight rolls, weight joints, and weight anges handy by putting them in the box and
putting the box under the Stand.
18.
Set the Weight Roll gently on top of the slack in the roll paper.
Important
•
Always set the Weight Roll on the paper. Failure to do this may cause rewinding problems.
•
When setting the Weight Roll on the paper, avoid touching the paper core and causing the wound roll
to become misaligned on the left and right end.
Roll Type Weight Flange to Use
Weight Flange 1 (*1)
Weight Flange 2
Optional accessories
Printer Parts 91