12.
Close the Ink Tank Cover.
At this point, ink is drawn out from inside the tubes.
Important
•
Do not remove the Maintenance Cartridge during this process.
When the process is nished, Finished preparing to move printer. Turn off printer. is
displayed.
13.
Press the Power button and turn off the printer.
Important
•
Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the Ink Tank,
wait until the printer comes online, and follow this procedure again.
14.
Disconnect the power cord, interface cable, and Media Take-up Unit Power Inlet.
15.
Open the Top Cover and lift the Ejection Guide.
16.
Remove the four ejection supports and lower the Ejection Guide.
Other Maintenance
Maintenance 613