Canon imagePROGRAF iPF810 User Manual page 74

Control Panel
Setting Item
(The type of paper is
displayed here.)(*1)
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide.
(→P.125) The type of paper indicated in the printer driver and related software (as well as on the
Control Panel ) is changed when you install the printer driver from the User Software CD-ROM or if you
update paper information by using the Media Conguration Tool.
60 Printer Parts
Bordless Margin Adjust the margin during borderless printing.
Choose Automatic to have the printer automatically detect the
paper width and congure the margin settings for borderless
printing. If margins are mistakenly created when Automatic
is selected, choose Fixed. In this case, the paper width is not
detected automatically, and the document is printed without
borders, using the margin settings required by the printer.
CutDustReduct. If you choose On, a line will be printed at the cut position when
paper cutting is selected. This option reduces the amount of
debris given off after cutting. It also helps prevent adhesive
from sticking to the cutter and keeps the cutter sharp if you use
adhesive paper. (→P.160)
NearEnd Sht Mrgn Specify a margin at the leading edge of sheets to ensure better
printing quality at the leading edge.
Note that if you choose 3mm, it may lower the printing quality
at the leading edge and affect feeding accuracy. The printed
surface may be scratched, and ink may adhere to the leading
edge.
Return Defaults Choose Yes to restore Paper Details to the default values.
Description, Instructions