Canon imagePROGRAF iPF810 User Manual page 625

1.
Remove the paper.
•
Rolls (→P.143)
•
Sheets (→P.169)
2.
Press the Menu button to display MAIN MENU.
3.
Press ▲ or ▼ to select Maintenance, and then press the ► button.
4.
Press ▲ or ▼ to select Move Printer, and then press the ► button.
5.
Press ▲ or ▼ to select the level of transfer, and then press the OK button.
6.
After the message Always contact service before preparing to move the printer. is shown
on the Display Screen, press the OK button.
The Display Screen indicates Please Wait...
•
If you have selected Level 1 in step 5, after processing in preparation to move the printer is nished,
the message Finished preparing to move printer. Turn off printer. is shown on the Display
Screen. Go to step 14.
•
When you are nished preparing to transfer the printer after selecting Level 2 or Level 3 conditions,
the Display Screen requests you to open the Ink Tank Cover. Follow the procedure starting with
step 7.
Important
•
If consumables must be replaced, the message Consumables must be replaced. Call for service.
is shown on the Display Screen and preparation is not possible. If this message is displayed, press
the OK button and contact your Canon dealer for assistance.
7.
Open the Ink Tank Cover.
8.
Lift the stopper (a) of the Ink Tank Lock Lever (a). Lift the Ink Tank Lock Lever until it stops,
and then push it down to the front.
Other Maintenance
Maintenance 611