The Paper Is Too Small - Canon imagePROGRAF iPF810 User Manual

The paper is too small.

When the Detect Mismatch menu is set to Pause,
the paper loaded in the printer is smaller than the
size specied in the printer driver.
When the Detect Mismatch menu is set to Warning,
the paper loaded in the printer is smaller than the
size specied in the printer driver.
RollWdthMismatch
The roll width set in Fit Roll Paper Width in the
printer driver does not match the width of the roll
loaded in the printer.
Cause
Cause
Corrective Action
Press the Online button to resume printing.
However, note that this error may cause paper jams
and affect the printing quality.
Adjust the paper size setting in the printer driver to
match the size loaded in the printer as follows.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Change the paper size setting in the printer driver
to the size loaded in the printer and try printing
again.
Replace the loaded paper with paper of a size that
matches the size setting in the printer driver as
follows.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Replace the loaded paper to match the paper size
setting in the printer driver and try printing again.
You can continue to print, but note that this error may
cause problems in the printing results.
Corrective Action
Press the Online button to resume printing.
However, note that this error may cause paper jams
and affect the printing quality.
Hold down the Stop button for a second or more to
cancel printing.
Make sure the roll width selected in the dialog box
displayed when you select Fit Roll Paper Width in
the printer driver matches the width of the roll loaded
in the printer, and then try printing again.
Messages regarding paper
Error Message 661