Canon imagePROGRAF iPF810 User Manual page 235

11.
On the Color Adjustment pane, adjust the color tones, brightness, and so on as desired.
D
Cyan
E
Magenta
F
Yellow
G
Gray Tone
H
Brightness
I
Contrast
J
Saturation
12.
Click OK to close the Color Settings dialog box.
13.
Access the Page Setup pane.
14.
Conrm the settings of
15.
Conrm the print settings, and then click
Note
•
For tips on conrming print settings, see "Conrming Print Settings (Mac OS X)". (→P.431)
Adjustment Item
A
Paper Source and
Fine-tune color tones by adjusting the levels of
Cyan, Magenta, and Yellow.
Adjust the gray tone to suit the images of
monochrome photos. Choose cool black (tinged
with blue), pure black (neutral), warm black (tinged
with red), and so on. Select the color tone in the
color region or from the list.
Adjust the brightness of printed images while
keeping the darkest and lightest portions intact.
Adjust the contrast of the darkest and lightest
portions relative to each other.
For soft gradation, decrease the contrast. For hard
gradation, increase the contrast.
Adjust the level of color saturation, in a range from
subdued to vivid.
C
Page Size.
M
Print to start printing.
Adjusting Images
Description
Enhanced Printing Options 221