Printing Does Not Start; The Data Lamp On The Control Panel Does Not Light Up; The Printer Does Not Respond Even If Print Jobs Are Sent - Canon imagePROGRAF iPF810 User Manual

Printing does not start

The Data lamp on the Control Panel does not light up

Cause
The printer is not on.
The printer is not selected in the
printer driver. (The printer is in
Sleep mode.)
The print job is paused. (The
printer is in Sleep mode.)

The printer does not respond even if print jobs are sent

Cause
The printer is ofine.
You have printed when select Save
in mail box is selected in Output
Method.
The display screen indicates the system is lling with ink
The printer was forced off during operation.
Make sure the power cord is securely plugged in, all the way. Press the
Power button to turn on the printer.
In Windows, select the printer by clicking Select Printer or Printer in
the printing dialog box and try printing again.
In Mac OS X, select the printer by clicking Printer Setup Utility (or
Print Center ) and try printing again.
In Windows, restart the print job as follows.
1.
Select the printer icon in the Printers and Faxes (or Printers )
window.
2.
Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1.
Open the Printer Setup Utility (or the Print Center ).
2.
Select the printer, and then Start Jobs in the Printers menu to
restart the print job.
Press the Online button on the Control Panel to bring the printer online.
Print the job saved on the printer's hard disk.
(→P.519)
Cause
Corrective Action
Corrective Action
Corrective Action
Wait until the system has been lled with ink. This
process may take about ten minutes.
Printing does not start
Troubleshooting 629