Manually Loading Paper To The Position For Printing - Canon imagePROGRAF iPF810 User Manual

Manually Loading Paper to the Position for Printing

When printing on non-standard sizes of paper or to specify a particular position to start printing, in the printer
menu set Width Detection to Off for the paper used.
Setting Width Detection to Off will prevent paper from being automatically advanced to the position for printing. In
this case, manually load paper at the position for printing.
Instructions for manually loading paper at the position for printing when Width Detection is set to Off are
as follows.
1.
If you send a print job from a computer beforehand, the type and size of paper are shown on the
Display Screen. Lift the Release Lever and open the Top Cover.
Important
•
Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these
parts may damage them.
Handling sheets for paper feed slots
Handling Paper 167