Loading And Printing On Rolls - Canon imagePROGRAF iPF810 User Manual

Printing procedure

Loading and Printing on Rolls

These are the basic steps for loading and printing on rolls.
Follow these steps to switch to a new roll or a roll of a different type or width before printing.
Note
•
The procedure varies depending on the ManageRemainRoll setting in the printer menu and whether or
not a barcode has been printed on the loaded roll. (→P.152)
•
Steps 6 and 7 are unnecessary if ManageRemainRoll is On and a barcode has been printed
on the roll.
•
Step 7 is unnecessary if ManageRemainRoll is Off.
•
When Width Detection in the printer menu is Off, after you have selected the type of paper in step
6, you will need to enter the roll width. (→P.57)
•
For details on supported sizes and types of rolls, see "Paper Sizes" or the Paper Reference Guide.
(→P.130) (→P.125)
•
If you are not using the optional Media Take-up Unit when printing long documents such as banners,
spread a clean cloth or paper on the oor. Use the Stationary Output Stacker to prevent long printed
documents from being soiled by the oor after they are printed. (→P.21)
•
If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and cut the paper manually. (→P.155)
1.
Turn the printer on. (→P.29)
2.
Select a roll as the paper source. (→P.133)
108 Basic Printing Workow