Canon imagePROGRAF iPF810 User Manual page 473

Item
RAW Mode Bi-direction
FTP Printing
SMTP Server Address
Primary DNS Server Address
Secondary DNS Server Address Specify the IP address of the
DNS Host Name
DNS Domain Name
Multicast DNS Service Name
7.
Click OK to display the Network page.
Note
•
If you specify to congure the IP address using DHCP, BOOTP, or RARP, there must be a server that
supports such protocol running in the network.
•
If you specify to congure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this
method is used rst. If you cannot obtain the IP address, the address specied in IP Address is used.
•
It takes a minute or two to determine whether DHCP, BOOTP, or RARP are available. We recommend
clearing check boxes of options you will not use.
•
If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS
servers, DNS host name, and DNS domain name in Primary DNS Server Address, Secondary DNS
Server Address, DNS Host Name, and DNS Domain Name, respectively.
Details
Activate this setting to use
Raw mode bidirectional
communication.
Activate this setting to use FTP
Printing.
Specify the SMTP server's IP
address.
Specify the IP address of the
primary DNS server.
secondary DNS server.
Specify the printer host name,
up to 63 characters (1-63
characters). Use single-byte
letters, numbers, and "-"
(hyphens). Do not use numbers
or "-" for the rst character or "-"
for the last character.
Specify the printer domain
name, up to 63 characters. Use
single-byte letters, numbers, "-"
(hyphens), and "." (periods). Do
not use numbers, "-", or "." for the
rst character, or "-" or "." for the
last character.
Specify the printer's Multicast
DNS service name. (1-63
characters)
This name will be displayed when
Bonjour functions are used.
Network Setting
Default Setting
Off
On
0.0.0.0
0.0.0.0
0.0.0.0
NB-17FBxxxxxxxxxxxx
blank
Canon iPFxxxx (xxxxxx)
Network Setting 459