Roll Paper Cannot Be Inserted Into The Paper Feed Slot; Cannot Load Sheets; Paper Is Not Cut Straight - Canon imagePROGRAF iPF810 User Manual

Roll paper cannot be inserted into the Paper Feed Slot

The roll paper is warped.

Cannot Load Sheets

The paper source selection is incorrect.

Paper is not cut straight

The paper is bent or curled at the cut position.
Paper rises by the ends of the cut position before
it is cut.
Paper is not cut
In the printer driver, No or Print Cut Guideline is
specied in Auto Cut.
In MAIN MENU, Eject or Manual is specied in
Cutting Mode.
Rolls are not cut when you are using the Media
Take-up Unit.
Cause
Cause
Cause
Cause
Corrective Action
Straighten out curls and reload the roll.
Corrective Action
Press the Feeder Selection button to activate the
Cut Sheet lamp.
Corrective Action
Straighten out any curling by the edges of the paper.
Reload the paper correctly.
Corrective Action
Specify Yes in Auto Cut in the printer driver.
Specify Automatic in Cutting Mode in MAIN MENU.
Either execute Paper Cutting in the Control Panel or
lift the Release Lever and cut the roll with scissors.
(→P.93)
Problems Regarding Paper
Troubleshooting 627