Cannot Adjust Band; Messages Regarding Printing Or Adjusment; Use Another Paper; Cannot Adjust Printhead - Canon imagePROGRAF iPF610 User Manual

Large format printer
Hide thumbs Also See for imagePROGRAF iPF610:
Table of Contents

Advertisement

Messages regarding printing or adjusment

Use another paper.

The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
Cannot print as specied.
Press Load/Eject and replace paper with A4/LTR (vertical) or larger
Cause
The loaded paper is too small.
Press Load/Eject and replace roll with 10 in. wide or larger roll.
Cause
The loaded paper is too small.

Cannot adjust band.

The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for feed amount adjustment.

Cannot adjust printhead.

The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for Printhead adjustment.
Cause
Cause
Cause
Messages regarding printing or adjusment
For automatic Printhead adjustment, we recommend
using a type of paper that you often use, other than
lm.
(→P.599)
Adjust the feed amount manually.
(→P.607)
Corrective Action
Press the Load/Eject button and switch to paper A4/Letter,
vertical, or larger.
Corrective Action
Press the Load/Eject button and load a roll at least 10
inches (254 mm) wide.
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.625)
2.
Clean the Printhead if the nozzles are clogged.
(→P.626)
Adjust the feed amount manually.
(→P.607)
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.625)
2.
Clean the Printhead if the nozzles are clogged.
(→P.626)
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.599)
Corrective Action
Corrective Action
Corrective Action
Error Message 713

Advertisement

Table of Contents
loading

Table of Contents