Messages Regarding Printing Or Adjusment; Use Another Paper; Cannot Adjust Band; Cannot Adjust Printhead - Canon iPF720 User Manual

Messages regarding printing or adjusment

Use another paper.

The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
Cannot print as specied.
Lift the release lever and replace paper with A4/LTR (vertical) or larger
The loaded paper is too small.
Lift the release lever and replace roll with 10 in. wide or larger roll
The loaded paper is too small.

Cannot adjust band.

The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for feed amount adjustment.

Cannot adjust printhead.

The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for Printhead adjustment.
Downloaded from ManualsPrinter.com Manuals
Cause
Cause
Cause
Cause
Cause
Messages regarding printing or adjusment
Corrective Action
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.491)
Adjust the feed amount manually.
(→P.501)
Corrective Action
Switch to paper A4/Letter (vertical) or larger.
Corrective Action
Load a roll 10 inches wide or larger.
Corrective Action
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.516)
2.
Clean the Printhead if the nozzles are clogged.
(→P.517)
Adjust the feed amount manually.
(→P.501)
Corrective Action
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.516)
2.
Clean the Printhead if the nozzles are clogged.
(→P.517)
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.491)
Error Message 587