The Contrast Becomes Uneven During Printing; The Length Of Printed Images Is Inaccurate; Documents Are Printed Crooked - Canon imagePROGRAF iPF810 User Manual

The contrast becomes uneven during printing

The paper feed amount is out of adjustment.
The type of paper specied in the printer driver does
not match the type loaded in the printer.

The length of printed images is inaccurate

In the printer menu, Band Joint is specied in Feed
Priority.
The type of paper specied in the printer driver does
not match the type loaded in the printer.

Documents are printed crooked

Skew Skew Check Lv. has been set to Loose or Off. Choose Standard in Skew Check Lv..
Width Detection has been set to Off.
Cause
Cause
Cause
Problems with the printing quality
Corrective Action
Adjust the feed amount.
(→P.562)
Load paper of the same type as you have specied
in the printer driver.
(→P.139)
(→P.164)
Make sure the same type of paper is specied in the
printer driver as you have loaded in the printer.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Change the type of paper in the printer driver and
try printing again.
Corrective Action
To ensure the feed amount matches the paper size,
select Print Length in Feed Priority in the printer
menu and enter the amount for adjustment in Adjust
Length.
(→P.562)
You can adjust the feed amount in 0.02% increments.
(→P.57)
Load paper of the same type as you have specied
in the printer driver.
(→P.139)
(→P.164)
Make sure the same type of paper is specied in the
printer driver as you have loaded in the printer.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Change the type of paper in the printer driver and
try printing again.
Corrective Action
Choose On in Width Detection.
Troubleshooting 641